MAKE SURE YOU HAVE A FRESH BATTERY IN THE PLAYER THE WHOLE PROCEDURE IS AT YOUR OWN RISK - IF AN ERROR OCCURS THE PLAYER MAY BE DAMAGED 1. Connect the player to your computer 2. Click the Removable Disk under My Computer. 3. Copy all needed files from the payer to your computer. 4. Copy the file of "$norfla$.ugr" into Removable Disk. 5. Please note that the file name of "$norfla$.ugr" cannot be changed. 6. After copying the file of "$norfla$.ugr" into Removable Disk, unplug the player by safety removal procedures. 7. Wait until the player finish startup procedure. 8. Connect the player to your computer again. 9. Format the player with FAT file system. 10. Copy the file of "$nanfla$.ugr" into Removable Disk. 11. Please note that the file name of "$nanfla$.ugr" cannot be changed. 12. Once you unplug the player, the firmware will be upgraded automatically. You will see "F/W updating" shown on the display. 13. After 1 minute, you will see "OK!" and then "Starting" shown on the display. 14. Then, you will see "Welcome" on the display. The firmware finished upgrading.